> ISO Certified  
> PED Certified
+91-22-6130-3333
> IBR Certified
sales1@adfitindia.com
Stainless Steel 304/304L Pipe Fittings

Chemical Composition %

C

Cr

Mn

NI

P

S

Si

Max

 

Max

 

Max

Max

Max

0.035

18.0-20.0

2.0

8.0-13.0

0.040

0.030

0.75


AVAILABILITY
 
Seamless Pipe 1/4" - 24"
Weld Pipe 1/2" - 60" 
Seamless Butt-Weld Fit. 1/2" - 24" 
Welded Butt-Weld Fit. 1/2" - 60"
Threaded Fittings 1/4" - 4"
Forged Fittings 1/4" - 4" 
Outlets 1/4" - 24" 
Flanges 1/2" - 60" 

SPECIFICATIONS
ASTM - A312, A376, A358, A269, A249, A403, A182, A351
ASME - SA312, 5A376, SA358, SA269, SA249, SA403, SA182, SA351

DESCRIPTION
304 stainless is a low carbon (0.08% max) version of basic 18-8 also known as 302. Type 302 has 18% chromium and 8% nickel. Type 304 has slightly lower strength than 302 due to its lower carbon content. Type 304 finds extensive use in welding applications because the low carbon permits some exposure in the carbide precipitation range of 800 0 F - 1500 OF without the need for post-annealing operations. However, the severity of corrosive environments may necessitate annealing after welding or the use of 304L. Type 304L has a carbon content of 0.03% or less. This alloy can be used in the as-welded condition without becoming susceptible to intergranular corrosion.

DESIGN FEATURES
Oxidation resistance up to 1650 0 F for continuous service and up to 1 1500 deg.F where cyclic heating is involved.
General purpose corrosion resistance.
Non-hardenable except by cold working.
Non-magnetic except when cold worked.
May be susceptible to chloride stress corrosion cracking.
Used where field working is employed.

TYPICAL APPLICATIONS
Sanitary
Dairy and Food processing
Heat exchangers, evaporators
Feedwater heaters

TENSILE REQUIREMENTS
Tensile Strength (KSI) 70
Yield Strength (KSI) 25

KSI can be converted to MPA (Megapascals) by multiplying by 6.895.

SS 304L 45 Degree Elbow   SS 304L 90 Degree Elbow   SS 304L 180 Degree Elbow   SS 304L Equal Tee
SS 304L 45 Degree Elbow
SS 304L 90 Degree Elbow
SS 304L 180 Degree Elbow
SS 304L Equal Tee
SS 304L Unequal Tee   SS 304L Barred Tee   SS 304L Concentric Reducer   SS 304L Eccentric Reducer
SS 304L Unequal Tee
SS 304L Barred Tee
SS 304L Concentric Reducer
SS 304L Eccentric Reducer
SS 304L Lateral   SS 304L Y   SS 304L Long Radius Bend   SS 304 Long Stubend
SS 304L Lateral
SS 304L Y
SS 304L Long Radius Bend
SS 304 Long Stubend
SS 304L Short Stubend   SS 304L Cap   SS 304L Swage Nipple   SS 304L Barrel Nipple
SS 304L Short Stubend
SS 304L Cap
SS 304L Swage Nipple
SS 304L Barrel Nipple
SS 304L Spool   SS 304L Forged Fitting   SS 304L Threaded Fitting   SS 304L Bsp Threaded Fitting
SS 304L Spool
SS 304L Forged Fitting
SS 304L Threaded Fitting
SS 304L Bsp Threaded Fitting
SS 304L Bspt Threaded Fitting   SS 304L Npt Threaded Fittings   SS 304L Threadolet   SS 304L Sockolet
SS 304L Bspt Threaded Fitting
SS 304L Npt Threaded Fittings
SS 304L Threadolet
SS 304L Sockolet
SS 304L Elbolet   SS 304L Latrolet   SS 304L Nipolet   SS 304L Flangeolet
SS 304L Elbolet
SS 304L Latrolet
SS 304L Nipolet
SS 304L Flangeolet
SS 304L Sweepolet   SS 304L Slipon Flange   SS 304L Socketweld Flange   SS 304L Blind Flange
SS 304L Sweepolet
SS 304L Slipon Flange
SS 304L Socketweld Flange
SS 304L Blind Flange
SS 304L Lap Joint Flange   SS 304L Weldneck Rtj Flange   SS 304L Threaded Flange   SS 304L Orifice Flange
SS 304L Lap Joint Flange
SS 304L Weldneck Rtj Flange
SS 304L Threaded Flange
SS 304L Orifice Flange
SS 304L Spectacle Blind Flange   SS 304L Pipe        
SS 304L Spectacle Blind Flange
  SS 304L Pipe        


eIndiaBusiness MemberCopyright © Advance Fittings Pvt. Ltd. . All Rights Reserved
Site Developed & Promoted by Advent InfoSoft Pvt Ltd.