> ISO Certified  
> PED Certified
+91-22-6130-3333
> IBR Certified
sales1@adfitindia.com
Alloy 625 Pipe Fittings

Chemical Composition %

C

Cr

Fe

Ni

Al

Ti

Co + TA

Max

 

Max

Min

Max

Max

 

0.10

20.0-23.0

5.0

58.0

0.40

0.40

3.15-4.15

AVAILABILITY
Seamless Pipe 1/4" – 10" 
Weld Pipe 1/2" - 48" 
Seamless Butt-Weld Fit. 1/2" - 10" 
Welded Butt-Weld Fit. 1/2" - 48" 
Threaded Fittings 1/4" - 4"
Forged Fittings 1/4" - 4" 
Outlets 1/4" - 24" 
Flanges 1/2" - 24" 

DESCRIPTION
Alloy 625 is a Nickel-Chromium alloy used for its high strength, excellent fabricability and outstanding corrosion resistance. Service temperatures range from cryogenic to 1800 deg.F. Alloy 625 strength is derived from the stiffening effect of molybdenium and columbium on its Nickel-Chromium matrix; thus precipitation-hardening treatments are not required. This combination of elements also is responsible for superior resistance to a wide range of corrosive environments of unusual severity as well as to high-temperature effects such as oxidation and carburization.

DESIGN FEATURES
High creep-rupture strength
Oxidation resistant to 1800° F
Seawater pitting and crevice corrosion resistant
Immune to chloride ion stress corrosion cracking

TYPICAL APPLICATIONS
Aircraft ducting systems
Aerospace
Jet engine exhaust systems
Engine thrust-reverser systems
Specialized seawater equipment
Chemical process equipment

TENSILE REQUIREMENTS
Tensile Strength (KSI) 120
Yield Strength (KSI) 60

KSI can be converted to MPA (Megapascals) by multiplying by 6.895.

Alloy 625 45 Degree Elbow   Alloy 625 90 Degree Elbow   Alloy 625 180 Degree Elbow   Alloy 625 Equal Tee
Alloy 625 45 Degree Elbow
Alloy 625 90 Degree Elbow
Alloy 625 180 Degree Elbow
Alloy 625 Equal Tee
Alloy 625 Unequal Tee   Alloy 625 Barred Tee   Alloy 625 Concentric Reducer   Alloy 625 Eccentric Reducer
Alloy 625 Unequal Tee
Alloy 625 Barred Tee
Alloy 625 Concentric Reducer
Alloy 625 Eccentric Reducer
Alloy 625 Lateral   Alloy 625 Y   Alloy 625 Long Radius Bend   Alloy 625 Long Stubend
Alloy 625 Lateral
Alloy 625 Y
Alloy 625 Long Radius Bend
Alloy 625 Long Stubend
Alloy 625 Short Stubend   Alloy 625 Cap   Alloy 625 Swage Nipple   Alloy 625 Barrel Nipple
Alloy 625 Short Stubend
Alloy 625 Cap
Alloy 625 Swage Nipple
Alloy 625 Barrel Nipple
Alloy 625 Spool   Alloy 625 Forged Fitting   Alloy 625 Threaded Fitting   Alloy 625 Bsp Threaded Fitting
Alloy 625 Spool
Alloy 625 Forged Fitting
Alloy 625 Threaded Fitting
Alloy 625 Bsp Threaded Fitting
Alloy 625 Bspt Threaded Fitting   Alloy 625 Npt Threaded Fittings   Alloy 625 Sockolet   Alloy 625 Weldolet
Alloy 625 Bspt Threaded Fitting
Alloy 625 Npt Threaded Fittings
Alloy 625 Sockolet
Alloy 625 Weldolet
Alloy 625 Elbolet   Alloy 625 Latrolet   Alloy 625 Nipolet   Alloy 625 Flangeolet
Alloy 625 Elbolet
Alloy 625 Latrolet
Alloy 625 Nipolet
Alloy 625 Flangeolet
Alloy 625 Sweepolet   Alloy 625 Socketweld Flange   Alloy 625 Weldneck Flange   Alloy 625 Blind Flange
Alloy 625 Sweepolet
Alloy 625 Socketweld Flange
Alloy 625 Weldneck Flange
Alloy 625 Blind Flange
Alloy 625 Lap Joint Flange   Alloy 625 Weldneck Rtj Flange   Alloy 625 Threaded Flange   Alloy 625 Orifice Flange
Alloy 625 Lap Joint Flange
Alloy 625 Weldneck Rtj Flange
Alloy 625 Threaded Flange
Alloy 625 Orifice Flange
Alloy 625 Spectacle Blind Flange   Alloy 625 Pipe        
Alloy 625 Spectacle Blind Flange
  Alloy 625 Pipe        


eIndiaBusiness MemberCopyright © Advance Fittings Pvt. Ltd. . All Rights Reserved
Site Developed & Promoted by Advent InfoSoft Pvt Ltd.