> ISO Certified  
> PED Certified
+91-22-6130-3333
> IBR Certified
sales1@adfitindia.com
Alloy 400 Pipe Fittings

Chemical Composition %

C

Cu

Mn

Ni

S

Si

Max

 

Max

Min

Max

Max

0.15

28.0-34.0

1.25

63.0

0.02

0.50

AVAILABILITY
Seamless Pipe 1/4" – 10" 
Weld Pipe 1/2" - 48" 
Seamless Butt-Weld Fit. 1/2" - 10" 
Welded Butt-Weld Fit. 1/2" - 48" 
Threaded Fittings 1/4" - 4"
Forged Fittings 1/4" - 4" 
Outlets 1/4" - 24" 
Flanges 1/2" - 24" 

SPECIFICATIONS
ASTM - B165, B127, B366, B164, B564
ASME - SB165, SB127, SB366, SB164,S8564

DESCRIPTION
Alloy 400 is used for its excellent combination of corrosion resistance, strength, ductility and weldability The corrosion resistance in seawater is especially good under high velocity conditions. Alloy 400 also is generally not susceptible to stress corrosion cracking.

DESIGN FEATURES
• Outstanding resistance to neutral and alkaline salt.
• One of few metallic materials which can be used in contact with fluorine, hydrofluoric acid, hydrogen fluoride and their derivatives.
• High resistance to caustic alkalis.
• Can be used in contact with dilute solutions of mineral acids such as sulfuric and hydrochloric, particularly if they are nonaerated.
• Resistance to chloride induced stress corrosion cracking.
• Good mechanical properties from sub-zero temperatures up to 1020 deg.F.

TYPICAL APPLICATIONS
Feed-water and steam generator tubing in power plants
Brine heaters and evaporator bodies in salt plant
Sulfuric and hydrofluoric acid alkylation plant
Industrial heat exchangers
Cladding for crude oil distillation columns
Splash-zone sheathing in offshore structures
Propeller and pump shafts for seawater service
Plant for uranium refining and isotope separation in the production of nuclear fuel
Pumps and valves used in the manufacture of chlorinated hydrocarbons
Monoethanolamine (MEA) reboiler tubes

TENSILE REQUIREMENTS
Tensile Strength (KSI) 81
Yield Strength (KSI) 36

KSI can be converted to MPA (Megapascals) by multiplying by 6.895.

Alloy 400 45 Degree Elbow   Alloy 400 90 Degree Elbow   Alloy 400 180 Degree Elbow   Alloy 400 Equal Tee
Alloy 400 45 Degree Elbow
Alloy 400 90 Degree Elbow
Alloy 400 180 Degree Elbow
Alloy 400 Equal Tee
Alloy 400 Unequal Tee   Alloy 400 Barred Tee   Alloy 400 Concentric Reducer   Alloy 400 Eccentric Reducer
Alloy 400 Unequal Tee
Alloy 400 Barred Tee
Alloy 400 Concentric Reducer
Alloy 400 Eccentric Reducer
Alloy 400 Lateral   Alloy 400 Y   Alloy 400 Long Radius Bend   Alloy 400 Long Stubend
Alloy 400 Lateral
Alloy 400 Y
Alloy 400 Long Radius Bend
Alloy 400 Long Stubend
Alloy 400 Short Stubend   Alloy 400 Cap   Alloy 400 Swage Nipple   Alloy 400 Barrel Nipple
Alloy 400 Short Stubend
Alloy 400 Cap
Alloy 400 Swage Nipple
Alloy 400 Barrel Nipple
Alloy 400 Spool   Alloy 400 Forged Fitting   Alloy 400 Threaded Fitting   Alloy 400 Bsp Threaded Fitting
Alloy 400 Spool
Alloy 400 Forged Fitting
Alloy 400 Threaded Fitting
Alloy 400 Bsp Threaded Fitting
Alloy 400 Bspt Threaded Fitting   Alloy 400 Npt Threaded Fittings   Alloy 400 Sockolet   Alloy 400 Weldolet
Alloy 400 Bspt Threaded Fitting
Alloy 400 Npt Threaded Fittings
Alloy 400 Sockolet
Alloy 400 Weldolet
Alloy 400 Elbolet   Alloy 400 Latrolet   Alloy 400 Nipolet   Alloy 400 Flangeolet
Alloy 400 Elbolet
Alloy 400 Latrolet
Alloy 400 Nipolet
Alloy 400 Flangeolet
Alloy 400 Sweepolet   Alloy 400 Socketweld Flange   Alloy 400 Weldneck Flange   Alloy 400 Blind Flange
Alloy 400 Sweepolet
Alloy 400 Socketweld Flange
Alloy 400 Weldneck Flange
Alloy 400 Blind Flange
Alloy 400 Lap Joint Flange   Alloy 400 Weldneck Rtj Flange   Alloy 400 Threaded Flange   Alloy 400 Orifice Flange
Alloy 400 Lap Joint Flange
Alloy 400 Weldneck Rtj Flange
Alloy 400 Threaded Flange
Alloy 400 Orifice Flange
Alloy 400 Spectacle Blind Flange   Alloy 400 Pipe        
Alloy 400 Spectacle Blind Flange
  Alloy 400 Pipe        


eIndiaBusiness MemberCopyright © Advance Fittings Pvt. Ltd. . All Rights Reserved
Site Developed & Promoted by Advent InfoSoft Pvt Ltd.